La profileuse pour glissière de sécurité d'autoroute peut faire une glissière de sécurité en W, une glissière de sécurité en thrie, elle peut aussi être conçue en deux vagues ou trois vagues dans une machine, juste besoin d'ajouter quelques stations à la fin de la machine.
Nous avons eu l'expérience de garde-corps de type russe, il y a quatre lignes totalement:① machine de profilage de garde-corps à deux/trois vagues, ② machine de profilage de poteau en U,③ ligne de poinçonnage de connexion et ④ ligne de poinçonnage de terminal de fin.
Aussi, nous avons de l'expérience dans la production de ligne de profilage pour guradrail pouvant répondre à différents standards :
AASHTO M180 - norme américaine
RAL RG620 - norme allemande
BS EN-1317-- norme européenne
AS/NZS 3845:1999--Norme australienne
Ligne de profilage à deux/trois vagues : Nous avons deux solutions pour vous.
2. Dévidoir hydraulique-Niveleur-Approvisionnement par servomoteur-Poinçonnage-Coupage-Plate-forme-Machine à rouler-Table de sortie
3.Spécial pour le dessin de glissière de sécurité turque à deux vagues (conforme à la NORME EN 1461:2009)
Dévidoir hydraulique-Guide-Nivelage-Machine à former les rouleaux-Poinçon hydraulique-Coupe hydraulique-Moule rétractable-Table de sortie
Nous avons l'expérience de l'exportation de notre profileuse pour glissières de sécurité en Russie, Arabie Saoudite, Turquie, Indonésie, etc. Et nous avons un projet du gouvernement chinois. Nous fournissons des machines et des glissières de sécurité à notre gouvernement. Vous pouvez voir notre ligne de production dans notre nouvelle usine, si vous nous rendez visite.
Nous proposons différentes solutions en fonction des dessins, de la tolérance et du budget des clients, en offrant un service professionnel personnalisé, adaptable à tous vos besoins. Quelle que soit la ligne que vous choisissez, la qualité de Linbay Machinery vous assurera d'obtenir des profils parfaitement fonctionnels.
Two Waves/Three Waves Highway Guardrail Roll Forming Machine |
|||
No. |
Item |
Specification |
Optional |
1 |
Suitable material |
Type:Galvanized Coil, PPGI, Carbon steel Coil |
|
|
|
Thickness(mm):4-5 |
|
|
|
Yield strength: 250 - 550MPa |
|
|
|
Tensil stress( Mpa):G350Mpa-G550Mpa |
|
2 |
Nominal forming speed(m/min) |
15 |
Or according to your requirement |
3 |
Forming station |
12-15 |
According to your profile |
4 |
Decoiler |
Hydraulic decoiler |
|
5 |
Main machine motor |
Sino-German Brand |
Siemens |
6 |
PLC brand |
Panasonic |
Siemens |
7 |
Inverter brand |
Yaskawa |
|
8 |
Driving system |
Gearbox drive |
Chain drive |
9 |
Rollers’ materail |
Cr12 |
GCr15 or #45 Steel |
10 |
Station structure |
Forged Iron station |
Wall panel station
Or torri stand structure
|
11 |
Punching system |
No |
Hydraulic punching station or Punching press |
12 |
Cutting system |
Post-cutting |
Pre-cutting |
13 |
Power supply requirement |
380V 60Hz |
Or according to your requirement |
14 |
Machine color |
Industrial blue |
Or according to your requirement |
1. Q: What kinds of experience do you have in producing highway guardrail roll forming machine?
A: We have experience of exporting our highway guardrail roll formers to Russia, Saudi Arabia, Turkey, Indonesia, India etc. We have produced AASHTO M180--American Guardrail standard (more useful and popular), RAL RG620--Germany Guardrail standard, BS EN-1317-- European Guardrail standard, AS/NZS 3845:1999--Australian Guardrail standard, EN 1461:2009 - Turkish Guardrail Standard.
2. Q: Can I produce W beam and Thrie beam guardrails on one machine?
A: One operator adds or takes off 5 stations of rollers according to our drawing. It wouldn't more than 30 minutes..
3. Q: How to change from producing W beam to thrie beam? And how long it takes?
A: According to the drawing given to replace forming rollers of last five forming station, process of changing just needs 30mins and only by one operator.
4. Q: What is delivery time of highway guardrail roll forming machine?
A: 80 days to 100 days depends on your drawing.
5. Q: What is your machine speed?
A: Machine’s working speed depends on drawing specially punch drawing. Normally line speed is around 8m/min.
6. Q: How could you control your machine’s precision and quality?
A: Our secret to producing such precision is that our factory has its own production line, from punching moulds to forming rollers, each mechanical part is completed independently by our factory self. We strictly control the accuracy at each step from design, processing, assembling to quality control, we refuse to cut corners.
7. Q: What is your after-sales service system?
A: We don’t hesitate to give you a 2 years warranty period for whole lines, 5 years for motor: If there will be any quality problems caused by non-human factors, we will handle it immediately for you and we will be ready for you 7X24H. One purchase, lifetime care for you.
Turkish Guardrail profile drawing:
Meet EN 1461:2009 Standard